QHY9 problem

QHY9 problem
« on: March 26, 2014, 12:05:46 PM »
some ideas?!

Re: QHY9 problem
« Reply #1 on: April 22, 2014, 02:38:38 AM »

a few things to check.  In camera settings check your clamp setting along with USB readout turned off.

I had similar issues and mine was relating to the cable from the DC201 box to the camera, as mine was damaged and i replaced it and it was fine. Often people sometimes plug in the wrong way round by mistake, the large bulge end needs to be plugged into the DC201 power unit.



  • *****
  • 5005
    • View Profile
    • Email
Re: QHY9 problem
« Reply #2 on: April 22, 2014, 01:36:11 PM »
         This problem looks like the water inside the CCD chamber. You need open CCD chamber and use warm air to dry it for 15minutes .The CCD chamber is a retangle construction. You need open the camera case -> take off the front board -> unscrew four screw of CCD chamber -> open CCD chamber -> dry it.

Best regards,
Qiu Hongyun