QHYCCD

Can't change Gain settings for QHY 128C in The SKY-X

Can't change Gain settings for QHY 128C in The SKY-X
« on: June 01, 2021, 01:46:13 AM »
When I change the gain and click OK, it reverts back to 1,000. It won't change. What's the problem?
The latest the SkyX  64-Bit software.
Thanks
John

Re: Can't change Gain settings for QHY 128C in The SKY-X
« Reply #1 on: June 02, 2021, 08:32:20 PM »
Hi,
    How do you connect camera?Via ASCOM driver or X2 plug-in?
Best Regards,
QinXiaoXu

Re: Can't change Gain settings for QHY 128C in The SKY-X
« Reply #2 on: June 02, 2021, 10:38:58 PM »
Hi,
    How do you connect camera?Via ASCOM driver or X2 plug-in?
Best Regards,
QinXiaoXu

I use X2 plug in to connect camera to the skyX 64-BIT

Re: Can't change Gain settings for QHY 128C in The SKY-X
« Reply #3 on: June 03, 2021, 08:55:24 PM »
Hi,
    Which paltform do you use?Windows or Linux?And your camera is QHY128C or QHY128PROC?We tested QHY128PROC with 32 bits version on Windows,it can setup Gain,please check the attachment about X2 plug-in and TSX version.
    And for QHY128PROC,it only have small change when you setup low gain value,it will have large change when you set high value.
Best Regards,
QinXiaoXu

Re: Can't change Gain settings for QHY 128C in The SKY-X
« Reply #4 on: June 10, 2021, 12:43:14 AM »
Platform is Windows 10.  Camera is 128C.  The SKY-X 64 Bit version.  X2 Plugin for the Sky.

Re: Can't change Gain settings for QHY 128C in The SKY-X
« Reply #5 on: June 10, 2021, 09:00:16 PM »
    Well,we only found 32 bits TheSkyX on their website,could you tell me where do you download the 64 bits TheSkyX?
Best Regards,
QinXiaoXu

Re: Can't change Gain settings for QHY 128C in The SKY-X
« Reply #6 on: June 12, 2021, 12:44:38 PM »
If your subscription is up to date, download the Windows daily build and install it over your full install. The latest daily build includes both the 32 bit and 64 bit version update.
Also a link to the windows 64 bit quick start guide :
https://www.bisque.com/thesky-64-bit-quick-start-guide/
Paramount MX+ / CFF250 F8 RC / Meade Series 5000 102ED APO / Stellarvue SV80ST / ADM MaxGuider
FLI ML-16200 / FLI CFW2-7 / Astrodon Gen II LRGB filters & Ha 5nm filter / ZWO ASI 174MC & 290MM
Pyxis 2" Gen 3 rotator / Mac OS X TheSkyX Pro / AstroImager / Lynkeos
http://www.rti-zone.org/astro.php

Re: Can't change Gain settings for QHY 128C in The SKY-X
« Reply #7 on: June 14, 2021, 09:59:46 PM »
OK,we will try it,please wait for some time.
Best Regards,
QinXiaoXu